Name: GZ Series
Availability: InStock

GZ Series

Category: GZ Series

Pneumatic Malaysia

Pneumatic JB

Pneumatic Control Components Malaysia

Pneumatic Valve Malaysia

Pneumatic Actuator Malaysia

Description

Product Feature

1.It is module design and can be used with G series F.R.L. combination by bracket.

2.This valve can be used as manual 3/2 way valve.

3.Visual indication marked EXH/SUP.

4.This valve meets the standard on installation conducted by operator specified by OSHA (Occupational Safety & Health Administration). When the machinery is maintained and serviced, the purge valve (Safe on-off valve) for remaining pressure shall be used to eliminate the remaining pressure when the air source is cut off. Valve must be locked to prevent accidental operation by a third party during maintenance. This prevents accidental system pressurization & cylinder actuation which can result in injuries to the machine operator.

Specification

Installation & Usage

1.Check whether the components have been damaged during transportation before installing and using.

2.Pay attention to whether the flow direction of air (notice “→” direction) and thread type are correct.

3.Please notice whether installation condition accords with technical requirements (such as “working pressure” and “applied temperature range”);

4.Avoid usage in an environment that exposes the filter and lubricator bowl through contact with Chlorine, solvent, aromatic essence, acid and alkali to avoid damage to the Filter and Lubricator bowl.

5.Regularly clean or change filter core. Lubricators and regulators shall be in descending order.

6.Keep the dust away. The dust cover shall be installed in intake and outlet when the device is dismantled and stored.